|
|
| |
|
Item No. |
Description |
Price |
| |
 |
O21-C9 |
2010 West 1600g dual spreader, splash guards, good wide 23.1x26 tyres, good auger and spreading rotor, very good original condition. |
£8450 + VAT |
| |
|
O21-C11 |
2001 West 1600g dual spreader, 18.4x26 tyres, mechanically good and has a good auger and spreading rotor but the body is going thin in some places. |
£1995 + VAT |
| |
|
O21-A1 |
2008 Marshall MS60 rotor spreader, 6 cube, oversized wheels with very good tyres, hydraulic lid, lights and brakes, very good original condition. |
£2250 + VAT |
| |
|
S21-B14 |
New 2021 West 2000g dual spreader, galvanized splash guards, LED lights, very well built, in stock and the last one at the old price, part exchange welcome, call for more information. |
£ POA |
| |
|
G21-C3 |
Bunning 75 rear discharge muck spreader, slurry door, 18.4 tyres, good original condition. |
£8995 + VAT |
| |
|
G21-A5 |
2011 West 2000g dual spreader, splash guards, 10 stud axle, lights and hydraulic brakes, has been on one farm from new and just come in part exchange against a new one the same, good auger and spreading rotor, well looked after, very good original condition. |
£10750 + VAT |
| |
|
D20-A8 |
New West Maelstrom rear discharge spreaders, commercial axle as standard, LED lights, very well built, must be seen, part exchange welcome, call for more information. |
£ POA |
| |
|
L-620 |
New West dual spreaders, Led lights, very well built, part exchange welcome, very keen deals, call for more information. |
£ POA |
|
| |
|
O21-B3 |
2004 Herbst 1600g slurry tanker, 550 tyres, sprung draw bar, swivel hitch, 2 manual fill points, downwards spread plate, 3 different sizes of pipes, good original condition. |
£3195 + VAT |
| |
|
S21-C1 |
2014 Conor 2500R slurry tanker with 7m trailing shoe, Firestone 30.5 tyres, sprung draw bar, 2 manual fill points, full length sight glass, LED lights, 10000l pump, 7m hydraulic folding trailing shoe or can be used as a normal tanker with a downwards spread plate, very good condition. |
£11995 + VAT |
| - |
- |
S21-B5 |
Marshall 1300g slurry tanker, good wide BN3 tyres, suction pipe and galvanized spreader plate, good original order. |
£1250 + VAT |
|
| |
|
S21-B3 |
2010 Claas Rollant 355RC round baler, wide pick up, crop press, wide angle PTO, net wrap, greaseable bearings, wide tyres, chopper, farmer owned, very good condition. |
£7995 + VAT |
| |
|
L21-B9 |
2013 Tanco 280 ARC mounted static remote control round bale wrapper, 750mm wrap, low bale count, excellent condition. |
£4995 + VAT |
| |
|
L21-B16 |
2013 Claas Rollant 375RC round baler, chopper, drop floor, MPS, wide pick up, net wrap, wide angle PTO, wide tyres, 18K bales, farmer owned, good order. |
£9995 + VAT |
|
| |
|
O21-C4 |
8 ton drop side tipping trailer, 13 foot long by 7 foot 4" wide, slots in the back for a bale extension, good strong chassis and tips well but does have the odd hole in the body. |
£1295 + VAT |
| |
|
S21-C4 |
2011 Bailey Tag 11 grain/silage trailer, very good 550 Alliance tyres, not done a lot of work, well looked after, very good original condition. |
£8750 + VAT |
| |
|
C20-B1 |
New West Bale trailers, 26 and 32 foot, carry 14t, 10 stud commercial axles, LED lights, strap box, galvanised bale gormers all as standard, extremely well built, must be seen, FB26 in stock on low but wide 435 tyres and air and oils brakes, |
POA + VAT |
|
|
M20-A1 |
New West 10/12/14/16ft grain/silage trailers lots of options and specs, very well built, call for a keen price |
POA |
|
|
J20-A7 |
2020 New Bailey 22/25/27ft bale trailers, LED lights, flashing beacon, hydraulic brakes, bale ladders, due in, very keen deals |
POA |
STRAW CHOPPERS ~ FEEDERS ~ BEDDERS |
 |
|
N21-A8 |
2005 Kuhn Euromix 1070 single auger tub mixer, 10c capacity, left and right discharge, side conveyor, scales, good auger and solid body, good order. |
£3950 + VAT |
| |
|
O21-C8 |
2011 Abbey vf1250 single auger tub mixer, 12 cube, left or right discharge, scales, Knives, good solid simple mixer, good original condition. |
£5750 + VAT |
| |
|
O21-B7 |
2002 Teagle 5050 silage/straw chopper, will do square or 4 and 5 foot round bales, could have a giraffe chute fitted, not done a lot of work, good condition |
£1895 + VAT |
| |
|
O21-B21 |
2000 Teagle 404 straw chopper, left and right discharge, short chop, good simple machine, good order. |
£895 + VAT |
| |
|
O21-B6 |
Teagle 4040 silage/straw chopper, giraffe chute, will do round or square bales, simple machine. |
£1295 + VAT |
| |
|
O21-B5 |
Teagle 4040 silage/straw chopper, giraffe chute, will do round or square bales, simple machine, good order. |
£1695 + VAT |
| |
|
O21-A5 |
2002 Teagle 8080 silage/straw chopper, twin speed gear box, simple cable control, been on one farm from new and has always been stored inside, excellent condition for it's age. |
£3750 + VAT |
| |
|
S21-A13 |
2010 Teagle 8080 straw/silage chopper, dual chop, electric controls, swivel chute, good original condition. |
£3250 + VAT |
| |
|
G21-A4 |
2015 Blaney Forager X10W bale unroller, hydraulic extension wing to feed into troughs and over barriers etc, can self load if wanted, done very little work, excellent condition. |
£3750 + VAT |
| |
|
L21-A2 |
Teagle Tomahawk 404 straw chopper, recent new blades, simple machine, good condition. |
£995 + VAT |
| |
|
J21-B13 |
Teagle Tomahawk 404 mounted straw chopper, giraffe chute, will do square or round bales, mechanically not done a lot of work but sat around, good order. |
£1295 + VAT |
|
|
|
N21-A10 |
Vaderstad Rollex 620 HD Cambridge rolls, 6.2m working width, heavy duty model with larger rings, good condition. |
£2795 + VAT |
|
|
N21-A9 |
Vaderstad Rollex 620 Cambridge rolls, 6.2m working width, good order |
£1795 + VAT |
|
|
N21-A5 |
Dal-Bo 6.3m Cambridge rolls, hydraulic folding, been on one local farm from new, good condition. |
£3250 + VAT |
|
|
N21-A2 |
McConnel 7 leg Shakaerator with oversized flexi-coil press, good metal, has been on one local farm from new and is in very good original condition |
£3950 + VAT |
| |
|
O21-C7 |
Browns 7 leg cultivator/scuffle, good strong frame and solid legs with shear bolt protection, good order. |
£350 + VAT |
|
|
|
N21-A6 |
Tanco elephant trunk bale handler, JCB Q-fit brackets, good order |
£395 + VAT |
| |
|
O21-B1 |
Alo Quicke 1.3m (4 ft 4") muck grab, old style Quicke brackets and pipes, excellent condition. |
£695 + VAT |
| |
|
S21-C7 |
Strimech flat 8/big bale grab, cone and pin/Matbro brackets, done little work, very well built, very good condition. |
£795 + VAT |
| |
|
S21-C9 |
Strimech grain pusher, JCB Q-fit brackets, 7ft 6" wide, well built, very good condition. |
£995 + VAT |
| |
|
S21-B25 |
Twose Elephant trunk bale handler, Euro brackets and pipes, adjustable and has bushes for spikes too, good condition. |
£695 + VAT |
| |
|
S21-B8 |
JCB Qfit/3 point mounted bale spike/fork. |
£195 + VAT |
| |
|
S21-A10 |
New shop soiled bale handler, demount rollers so can be used as a twin spike, pipes but no brackets, well built. |
£595 + VAT |
| |
|
G21-B2 |
New unused 5 foot / 1.5m loader bucket, Euro brackets, well built, |
£395 + VAT |
| |
|
L21-A28 |
Bale spike with Quicke brackets. |
£40 + VAT |
| |
|
L21-A13 |
Heavy duty single bale spike, Euro brackets, tidy. |
£165 + VAT |
| |
|
L21-A29 |
Bag lifter with Quicke brackets |
£40 + VAT |
| |
|
N21-B13 |
New bale spikes with Euro brackets, well built, 1, 2 or 3 heavy duty spikes, |
from £195 + VAT |
| |
|
C21-A2 |
New unused 2m loader buckets, Euro brackets, well built, |
£495 + VAT |
| |
|
A21-B20 |
Redrock 1.2m (4ft) Shear grab, Kramer brackets, straight and tidy with good pipes, rams and blade but needs 2 tines and a tine bush replacing. |
£295 + VAT |
| |
|
M21-A6 |
New Granit 2 ton pallet tines with Euro brackets, 2 ton capacity, very well built. |
£550 + VAT |
| |
|
J21-C6 |
Single bale spike with Chilton brackets or can be mounted on the 3 point linkage. |
£150 + VAT |
| |
|
V20-C21 |
New twin bale spike, can be used on 3 point linkage or Euro loader brackets. |
£250 + VAT |
| |
|
G20-C2 |
Albutt 2 big bale grab, very well built, straight original condition but missing 1 ram. |
£595 + VAT |
| |
|
M20-D3 |
Chilton 4ft heavy duty bucket c/w Chilton brackets, very good order |
£295 |
| |
|
C_1115 |
2001 Quicke Q40 loader, done very little work, c/w brackets and joystick to fit Case JXU 105, due in |
POA |
| |
|
U_3 |
Claas Scorpion adapter plate to fit JCB |
£495 |
| |
|
9q |
New twin bale spike, c/w Euro brackets |
£195 |
|
| |
|
O21-C5 |
2001 Claas Disco 3050 plain disc mower, 3m cut, good skids and nice and tight on the discs, all the oils have been checked and it runs well, good original condition. |
£2450 + VAT |
| |
|
O21-C6 |
2012 Housemartin FL-150 flail toper, 1.5m/5ft cut, roller, Y shaped flails, new belts, good condition. |
£595 + VAT |
| |
|
S21-B55 |
2009 Krone AM243CV mounted mower conditioner, 2.4m cut, quick release blades, done little work, very good original condition. |
£3450 + VAT |
| |
|
G21-C14 |
2014 Kuhn FC283 G11 mounted mower conditioner, 2.8m cut, quick release blades, centre pivot, spreader hood, good order. |
£4450 + VAT |
| |
|
G21-C1 |
2009 Pottinger Novadisc 265 plain disc mower, 2.65m cut, quick release blades, swath wheels, not a lot of work, good condition. |
£3995 + VAT |
PARTS |
| |
|
S21-B12 |
Kuhn 202 mounted mower conditioner (for spares or as a whole) is complete with the bed and PTO shafts but does need attention to the bed. |
£495 + VAT |
| |
|
S21-B7 |
Marshall 904 front wheel, could fit others, the tyre isn't the best but the rim is in very good condition and was sand blasted and re painted. |
£150 + VAT |
| |
|
G21-B3 |
Claas 300 plain disc mower, 3m cut, breaking for spares. |
POA + VAT |
| |
|
G21-A2 |
2016 Powerup 2.2m fully hydraulic offset and tilt flail topper, no PTO or roller, bent main rotor so is for spares. |
£595 + VAT |
| |
|
J21-A7 |
West 1300/1600 dual spreader extension, very well made. |
£250 + VAT |
| |
|
J21-A1 |
2008 Twose SIP Star 430/12 sing rotor rake for spares. |
£595 + VAT |
| |
|
S_10 |
New Heavy duty PTO guards, multi fit (comes with various size bearings) |
£69 |
| |
|
T9 |
BP Mec 8000l pump, came off a slurry tanker that had done little work, good working order |
£395 |
| |
|
R8 |
2007 John Deere 331 mower conditioner, breaking for parts |
POA |
| |
|
G17 |
Quantity of Claas disco 3050 fc plus parts |
POA |
| |
|
3_DD |
Shop soiled grain door for Bailey trailer |
£295 |
|
|
|
N21-A7 |
2008 Kuhn GA 6501 twin rotor rake, adjustable working width of 5.65m - 6.4m, independent rotor lift, wide angle PTO, has been on one farm from new and not done a lot of work and very well cared for, excellent condition. |
£7995 + VAT |
|
|
N21-A4 |
Teagle super-ted 220 swath wilter, 2.2m working width, handy simple machine, no broken tines, good original condition. |
£1950 + VAT |
|
|
N21-A3 |
2011 Lely Lotus Stabilo 600 four rotor hydraulic folding tedder, 6m working width, very well cared for, excellent condition. |
£4950 + VAT |
| |
|
O21-C3 |
2011 Kverneland 9039 single rotor rake, 3.9m working width, bogie axle, very good original condition. |
£2950 + VAT |
| |
|
O21-B23 |
2014 Claas liner 2900 twin rotor rake, hydraulically adjustable 8-9m working width, good wide tyres, independent rotor lift, wide angle PTO, good condition. |
£10995 + VAT |
| |
|
O21-B18 |
2011 Kuhn GF 502 four rotor hydraulic folding tedder, 5.2m working width, Digi drive, excellent condition |
£3950 + VAT |
| |
|
O21-B12 |
PZ 200 haybob, will have all good tines and springs, good condition. |
£425 + VAT |
| |
|
S21-C10 |
Krone KW 5.50 four rotor hydraulic folding tedder, 5.5m working width, hydraulic headland steering, good order. |
£1895 + VAT |
| |
|
G21-C10 |
2005 Krone KW 7.70 six rotor hydraulic folding tedder, 7.7m working width, hydraulic headland steering, come straight from work in part exchange against a newer tedder, good condition. |
£2450 + VAT |
|
| - |
- |
- |
- |
- |
|
|
|
N21-A1 |
2008 Suton 230 three point mounted brush, 2.3m, hydraulic drive, very good bristles, can be pivoted either side or used straight, good condition. |
£995 + VAT |
| |
|
O21-C1 |
2012 Joskin BF360 R3S2 mounted harrow, 3.6m working width, manual folding, galvanized frame, done little work, simple well built machine, very good condition. |
£1450 + VAT |
| |
|
O21-C2 |
Hackett 14 foot manual folding chain harrows, very good chain/web |
£475 + VAT |
| |
|
O21-C10 |
Hardi MX800 mounted sprayer, 12m booms, 800l tank, good original condition for it's age but has had some damage/repair to the tank. |
£395 + VAT |
| |
|
O21-B4 |
2011 Cherry Products 8 foot push off fork, Hardox tines, 3 point mounted, very well built, a couple of inches worn off the tines but is in good condition. |
£1295 + VAT |
| |
|
O21-B9 |
Bamlet 3 point mounted PTO cement mixer, handy little machine, good original condition. |
£350 + VAT |
| |
|
O21-B11 |
2004 Bomford Falcon 6T three point mounted hedge cutter, telescopic reach up to 6.5m, 1.2m head, T flails, electric XTC controls, oil cooler, power slew, good condition. |
£6950 + VAT |
| |
|
O21-B17 |
McConnel PA8 three point mounted rear digger, hydraulic legs, has it's own pump so doesn't need the tractor hydraulics, 2 buckets, done little work, very good original condition for it's age. |
£1495 + VAT |
| |
|
O21-B16 |
4 foot galvanized mobile sheep feeder/hay rack on wheels, very good condition. |
£195 + VAT |
| |
|
O21-B14 |
Howard 5 foot rotavator, very good condition for it's age, as you can see in the photos some of the tines have been removed and some of the tine holders have been moved for a specific job but could be put back to a normal rotavator, spare tines included. |
£495 + VAT |
| |
|
O21-A3 |
2006 Opico 6m tined grass harrows, hydraulic folding, very good condition. |
£2295 + VAT |
| |
|
O21-A4 |
2012 Storth 15 foot galvanized slurry stirrer, hydraulic lift, very good order. |
£1150 + VAT |
| |
|
S21-A12 |
Stocks, 12v electric seeder, manual on/off and 3 point linkage kit, good condition. |
£295 + VAT |
| |
|
S21-A7 |
IAE galvanised push/pull yard scraper, tidy order. |
£295 + VAT |
| |
|
G21-C7 |
2018 IAE galvanized push/pull yard scraper, adjustable width, not had much use, A frame or 3 point linkage attachment, good condition. |
£495 + VAT |
| |
|
G21-B11 |
Lister petrol engine elevator, barn stored, excellent original condition for it's age. |
£395 + VAT |
| |
|
G21-A6 |
2002 Teagle XT46 fert spreader, hydraulic shut off, good order. |
£695 + VAT |
| |
|
L21-A16 |
7/8 foot mounted chain harrows, not had a lot of work, tidy order. |
£395 + VAT |
| |
|
L21-A10 |
Parmiter mounted swing around post knocker, valve block and 2 extra rams, post bracket, good order. |
£1495 + VAT |
| |
|
N21-B7 |
EDL post knocker, mini digger or loader mounted, well built, home made stand, good condition. |
£1450 + VAT |
| |
|
N21-B8 |
2019 unused 2.5m 3 point mounted snow plough, hydraulic adjusts to either side, LED lights, well built. |
£1995 + VAT |
| |
|
N21-A25 |
2005 Yanigav post knocker, 3 point mounted or has an adapter to fit onto a Euro headstock loader, good spec with a valve block, the weight is a lot larger than it looks as it is built into the mast, good condition. |
£1695 + VAT |
| |
|
Y21-B4 |
3 point linkage kit for AG 150/175/200 Dispenser, hydraulic tilt, could be modified for another job. |
£195 + VAT |
| |
|
C21-A3 |
McConnel PTO saw bench, flat belt, sliding table, good working order. |
£395 + VAT |
| |
|
M21-C14 |
New Beaconsfield Products mounted chain harrows, very well built, made in England. 14ft £1200, 16ft |
£1300 + VAt |
| |
|
M21-A12 |
2005 Amazone Z-AX Perfect 1402 Fert spreader, tidy sound condition but is tight on the gear box so does need some attention. |
£595 + VAT |
| |
|
M21-A15 |
Set of used Firestone tractor tyres, 18.4R38, 15-30% tread, genuine reason they were replaced. |
£295 + VAT |
| |
|
J21-B1 |
Richard Western silage kit off an 10t grain trailer, good solid order. |
£395 + VAT |
| |
|
D20-A5 |
New Storth 20ft slurry stirrer in stock, complete with PTO and hydraulic depth control. |
£2395 + VAT |
| |
|
V20-C10 |
2020 New Foster push/pull yard scraper, adjustable width, A frame or 3 point mounted. |
£695 + VAT |
| |
|
V20-C18 |
New heavy duty feed rings, local engineer made, very well built. |
£275 + VAT |
| |
|
V20-C12 |
New 20ft 40 space feed trailer, very well built, local engineer made. |
£1250 + VAT |
| |
|
S20-A9 |
Agriquip post knocker, very simple but does the job, good condition |
£250 + VAT |
| |
|
R_5 |
New Beaconsfield products 10 ton Hydraulic log splitter, Made in England, very well built |
£625 |
|
|
|
